当前位置: 首页 » 技术文档 » 量具量仪中英文对照

技术文档

量具量仪中英文对照

发布时间:2011-06-24

量具量仪中英文对照

 

     1.刀口型直尺:knife straigjht edge 
      2.刀口尺: knife straigjht edge
  3.三棱尺three edges straigjht edge
  4.四棱尺four edges straigjht edge
  5.条式和框式水平仪bar form and square levels
  6.合像水平仪imaging level meter
  7铸铁平板cast iron surface plate
  8.岩石平板granite surface plate
  9.铸铁平尺cast iron straigjht edge
  10.钢平尺和岩石平尺steel and granite straigjht edge
  11.圆度仪roundness measuring instrument
  12.电子水平仪electronic level meter
  13.表面粗糙度比较样块铸造表面roughness comparison specimens cast surface
  14.表面粗糙度比较样块磨、车、铣、插及刨加工表面roughness comparison specimens-ground,turned,bored,milled,shape and planed
  15.表面粗糙度比较样块电火花加工表面roughness comparison specimens spark-erostion machining surfaces
  16.表面粗糙度比较样块抛光加工表面roughness comparison specimens pollshed surfaces
  17.接触式仪器的标称特性
  18.轮廓profiles
  19.轨迹轮廓traced profile
  20.基准轮廓reference profile
  21.总轮廓total profile
  22.原始轮廓primary profile
  23.残余轮廓residual profile
  24.触针式仪器stylus instrument
  25.感应位移数字存储触针式量仪displacement sensitive,digitally storing stylus instrument
  26.触针式仪器的部件stylus instrument components
  27.测量环measurement loop
  28.导向基准renfence guide
  29.驱动器drive unit
  30.测头(传感器) probe(pick-up)
  31.拾取单元tracing element
  32.针尖stylus tip
  33.转换器transducer
  34.放大器amplifier
  35.模/数转换器analog-to-digital converter
  36.数据输入data input
  37.数据输出data output
  38.轮廓滤波和评定profile filtering and eva luation
  39.轮廓记录器profile recorder
  40.仪器的计量特性metrological characteristics of the instrument
  41.静测力的变化change of static measuring force
  42.静态测力static measuring force
  43.动态测量力dynamic measuring force
  44.滞后hysteresis
  45.测头的测量范围transmission function for the sine waves
  46.仪器的测量范围measuring range of the instrument
  47.模数转换器的量化步距quantization step of the ADC
  48.仪器分辨力instrument resolution
  49.量程分辨力比range-to-resolution ratio
  50.测头线性偏差probe linearity deviation
  51.短波传输界限short-wave transmission limitation
  52.轮廓垂直成分传输vertical profile component transmission1
  53表面粗糙度比较样块抛丸、喷砂加工表面roughness comparison specimens shot blasted and blasted surfaces
  54产品结构几何量计术规范(GPS)geometrical product specifications(GPS)
  55表面结构surface texture
  56接触式仪器的标称特性nominal characteristics of contact instruments
  57公法线千分尺micrometer for mearsuring root tangent lenghths of gear teeth
  58最大允许误差maximum permissible error
  59圆柱直齿渐开线花键量规gauges for straight cylindrical involute splines
  60齿厚游标卡尺Gear tooth vernier calipers
  61齿轮渐开线样板the involute master of gear
  62齿轮螺旋线样板the helix master of gear
  63矩形花键量规gauges for straight–sided splines
  64测量蜗杆master worm
  65万能测齿仪universal gear measuring instrument
  66万能渐开线检查仪universal involute measuring instrument
  67齿轮齿距测量仪gear circular pictchmeasuring instrument
  68万能齿轮测量机Universal gear measuring machine
  69齿轮螺旋线测量仪gear helix measuring instrument
  70便携式齿轮齿距测量仪manual gear circular pitch measuring instrument
  71便携式齿轮基节测量仪manual gear base pitch measuring instrument
  72立式滚刀测量仪vertical hob measuring instrument
  73齿轮双面啮合综合测量仪Gear dual-flank measuring instrument
  74齿轮单面啮合整体误差测量仪Gear single-flank meshing integrated error measuring instrument
  75梯形螺纹量规gauges for metric trapezoidal screw threads
  76工作螺纹量规work gauges for metric trapezoidal screw threads
  77校对螺纹量规check gauges for metric trapezoidal screw threads
  78.梯形螺纹量规型式与尺寸Types and dimensions of metric trapezoidal screw threads
  79.普通螺纹量规型式与尺寸Types and dimensions of gauges purpose screw threads
  80.非螺纹密封的管螺纹量规Gauges for pipe threads prcessure-tight joints are not made on the threads
  81.螺纹千分尺Screw thread micrometer
  82.最大允许误差maximum permissible error
  83.间隙螺纹量规Clearance screw gauge
  84.量针Bar gauge
  85.螺纹样板Screw thread template
  86.用螺纹密封的管螺纹量规Gauges for pipe threads where pressure-tight joints are made on the threads
  87.刀具预调测量仪精度Accuracy of the presetting instrument
  88.薄膜式气动量仪Membrane type pneumatic measuring instrument
  89.光栅线位移测量系统Grating linear displacement measuring system
  90.光栅角位移测量系统Grating angular displacement measuring system
  91.磁栅线位移测量系统Magnet-grid linear displacement measuring system
  92.量块附件Accessories for gauge blocks
  93.V形架Vee blocks
  94.比较仪座Comparator stand
  95.磁性表座Magnetic stand
  96.万能表座Universal stand for dial indicator